Mikrotik ROS - issues with flow export
Information
Summary: |
In some cases, Mikrotik upgraded to ROS 7 is not sending flow data properly and these might not appear on the collector. |
Environment: |
Product: Flowmon Collector Version: Any Platform: Any |
Question/Problem Description: |
I cannot see flow data from the Mikrotik device after the upgrade to ROS 7. |
Steps to Reproduce: | |
Error Message: | |
Defect Number: | |
Enhancement Number: | |
Cause: | Mikrotik is sending flow data with the source IP address 0.0.0.0. |
Resolution: | Configure real source IP address (src-address) in IP/Traffic flow in ROS. |
Workaround: | |
Notes: |
Was this article helpful?
0 out of 0 found this helpful