Determining if LoadMaster has SSD or DOM installed

Depending on the LoadMaster model and model revision, it may be difficult to tell if the LoadMaster has an SSD (Solid State Drive) or DOM (Disk on Module) installed.

In most cases, this information can be ascertained from the LoadMaster boot log.

This log can be accessed from the LoadMaster Web User Interface (WUI) under System Configuration > Logging Options > System Log Files > Boot.msg File

Once the logs are open in the browser you can find this info by searching for the term "Direct-Access"

Press Ctrl + F on the keyboard and type "direct-access" (without the quotes) in the search field.

 

  • If the LoadMaster has an SSD installed, the log entry will look like this:

         scsi 0:0:1:0: Direct-Access     ATA      32GB SATA Flash  SFDC PQ: 0 ANSI: 5

 

  •  If the LoadMaster has a DOM installed, the log entry will look like this:

          scsi 1:0:0:0: Direct-Access ATA TS512MSDOM7H 2011 PQ: 0 ANSI: 5

 

  •  If the LoadMaster is virtual, the log entry will look similar to this and will indicate the disk is virtual:

          scsi 0:0:0:0: Direct-Access     VMware   Virtual disk     1.0  PQ: 0 ANSI: 2

Was this article helpful?

0 out of 0 found this helpful

Comments