Missing monitoring ports - FOS 12.2.5


3 comments

Avatar

Gregory Oatman

HY there i can see your post and i must say

  1. Port Configuration: Ensure that the monitoring ports you are expecting to see are configured correctly. Verify that the ports are enabled and properly connected.

  2. Firmware Version: Check if there are any known issues or limitations with FOS version 12.2.5 that could cause monitoring ports to be missing. Upgrading to a newer, more stable firmware version might resolve the issue if it is a firmware bug. MyAARPMedicare Login

  3. Port Licenses: Some monitoring features or capabilities may require specific licenses on the Brocade SAN switch. Check if the required licenses are properly installed and activated.

  4. Port Grouping: If you are using port groups, ensure that the monitoring ports are part of the appropriate port groups and that they are correctly configured.

  5. Check Logs: Review the switch logs for any error messages or warnings related to the missing monitoring ports. Logs might provide clues about potential issues.

Thanks and regards

Gregory Oatman

0

Avatar

fox dealer

If you are missing monitoring ports on your FOS 12.2.5 device, there could be several reasons for this issue. Here are some steps you can try to resolve the problem:

  1. Check port configuration: Make sure that the monitoring ports are properly configured on your FOS device. You can check the port configuration by accessing the device's configuration files or using a network management tool.

  2. Check firmware version: Make sure that you are using the correct firmware version for your FOS device. Some firmware versions may not support certain monitoring ports or may require additional configuration.

  3. Check switch model: Make sure that your FOS device supports the monitoring ports that you are trying to use. Some switch models may not have all the monitoring ports available or may require additional hardware to support them.

  4. Check license: Make sure that you have the correct license to use the monitoring ports. Some monitoring ports may require additional licensing or may only be available on specific license tiers.

  5. Check hardware: Check if the monitoring ports are physically present on your FOS device. Some switch models may have different hardware configurations that may not include all the monitoring ports.

  6. Check with vendor: If none of the above steps work, you may need to contact the vendor or manufacturer of your FOS device for further assistance. They may be able to provide additional troubleshooting steps or recommend a solution to the problem.

Overall, missing monitoring ports on your FOS device can be a frustrating issue, but there are several steps you can take to troubleshoot and resolve the problem.

0

Avatar

jo bh

I don't have real-time information on specific software updates or hotfixes, and my last knowledge update was in January 2022. Therefore, I recommend checking directly with Kemp Technologies support or their official channels for the most up-to-date information on hotfixes or patches for FOS 12.2.5.

You can reach out to Kemp Technologies support through their official support portal, customer service, or any communication channels they provide for support inquiries. They should be able to provide you with the latest information on available fixes for the "missing monitoring ports" problem in FOS 12.2.5 and guide you on the appropriate course of action.

Always make sure to follow the official support channels for the most accurate and reliable information regarding your specific software version and issues.

0

Please to leave a comment.