Interface Bonding

0

Hello, I have an 8 Port LM. ETH0 is currently on 10.10.4.x/20. I configured the switch to use LACP. On the LM, I bonded ETH2,ETH3,ETH4 and assigned 10.10.15.70/20. I checked the switch and LACP is showing up, but I can't ping 10.10.15.70. I checked the VLAN property on the switch and the LACP team I created is on the right VLAN. Both IP address are on the same subnet. Could this be the issue? I tried assigning the ETH0 with a different IP address, it is still not working. I also tried assigning a VLAN ID on the bonded interface, but no joy.

2 comments

Avatar
0
lpacuan

I think I figured it out.

Avatar
0
James Rago -- K360 Technical Product Manager

Just a heads up, if you are going to configure VLAN's on our interfaces, you cannot address the interface as well. Leave physical interface blank and configure the VLAN interface.