Installing LoadMaster on GCP

0

Hello All - 

I am attempting to set up LoadMaster on Google Cloud Platform (GCP).  I took the VirtualBox image and converted it to RAW format as required by GCP to import.  The image imported OK to GCP, I added two NICs, and it seems to try and start up but fails to stay online.  I'm wondering if there is any way to either get a RAW format disk directly for the LoadMaster (in case it is something with the image) or a way to "manually" install the software on a standard Linux distribution?  Is it even possible to install this way (from an exported disk image)?  Thanks in advance for any help.

GCP console logs show this before it turns off:

Serial port 1 (console) output for kemp-loadbalancer

SeaBIOS (version 1.8.2-20171130_102032-google)
Total RAM Size = 0x00000000f0000000 = 3840 MiB
CPUs found: 1     Max CPUs supported: 256
found virtio-scsi at 0:3
virtio-scsi vendor='Google' product='PersistentDisk' rev='1' type=0 removable=0
virtio-scsi blksize=512 sectors=33554432 = 16384 MiB
drive 0x000f2340: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=33554432
Booting from Hard Disk 0...

SYSLINUX 6.04  Copyright (C) 1994-2015 H. Peter Anvin et al
boot: 
Loading linux... ok
Loading initrd.gz...ok

1 comment

Avatar
0
Tony Vaughan

Hello,

sorry for the delay on this,

I have checked with my colleagues,

currently Google Cloud Platform (GCP) is not supported,
unfortunately this also includes trying to deploy it using a non-cloud image