DSCP Qos setting on Virtual Servers

0

Currently you have the options to set QoS on a layer 7 virtual server, the documentation states that this set a DSCP code point in the IP header of the packet leaving the Virtual Server, however the QoS options appear to be TOS bits and these do not equal any valid DSCP code points.  

Please add the option to have DSCP code points on virtual Servers.  

3 comments

Avatar
0
itvendorskemp

Or just copy the DSCP value recieved.

Avatar
0
Mark Hoffmann -- Technical Product Manager, LoadMaster Product Owner

Hi and thank you for posting,

This is an interesting issue that has sparked a bit of a discussion here. Please bear with me while I get clarification on a few points, and I'll update this thread ASAP.

Best regards,

Mark

Avatar
0
Mark Hoffmann -- Technical Product Manager, LoadMaster Product Owner

Hello again,

It appears that the documentation is incorrect and development is working to address this. You are absolutely correct that the options presented are ToS options and do not set any DSCP code points. My apologies for the misdirection. Setting DSCP code points for QoS is currently not supported and I don't have an estimate on when (or if) this might be included in a future version of the product at this time.

Best regards,

Mark